Diamond Systems Tritan Instruções de Operação descarregar pdf (Página 59)

autocast universal

230 Casting System Operation of the autocast universal Stand 21.7.04 B 19

Important:

The ”0“ position is for

positioning the muffel

on the contact plate.

Always move the switch to

its upper position for melting

and casting.

Ceramic seal

The ceramic seal (R) serves to seal the ring (S) against the

melting chamber (A). It provides an effective seal between the

ring and the pouring funnel (T) during the entire melting and

casting process.

Seals that are dry or have not been damaged can be reused

up to 3 times. Ceramic seals are available for high temperature

casting (Order No. 090-012-60)

Important!

Damaged or wet seals should

not be used as these will cause

casting failures.

Positioning the muffel

• Remove the muffel from the heating oven.

• Align the seal (R) to the funnel (S).

• Place the casting ring into the casting chamber (B) with its

flat side towards the back panel.

• Place the muffel (S) on the centre of the muffel-contact

plate (P) so that the downsprue is exactly beneath the

pouring funnel (T).

• By switching the rocker switch (Q) upwards, press the

muffel against the pouring funnel (T).

Ceramic seal (R)

Funnel (S) with ceramic seal (R)

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 89 90

Sem comentários

Diamond Systems Tritan Instruções de Operação Página 59